-35%
Savings
-35%
Magpul Industries
Magpul MBUS 3 Front Sight, Picatinny Mount, Flip-Up, Flat Dark Earth, Back-Up Sight
$25.81
$39.95
You save $14.140000000000004 (35%)
Sold by: Battle Hawk Armory
In Stock at Battle Hawk Armory
Easy Returns – merchant policy applies
Price Tracked – we monitor this deal 24/7
Price History
Loading price history...
Customer Reviews
Loading reviews...
Product Details
Magpul MBUS 3 Front Sight, Picatinny Mount, Flip-Up, Flat Dark Earth, Back-Up SightThe Magpul MBUS 3 Sight - Front in Flat Dark Earth (part number MAG1166-FDE) is a compact, spring-loaded flip-up front sight for M1913 Picatinny rails. It carries over the durability and light weight of the original MBUS in a smaller polymer package that stows just 0.47 in. tall and 1.38 in. wide, so it stays out of the way of your optic and resists snagging. A spring-loaded ambidextrous button deploys it fast, the elevation wheel adjusts without tools, and the front post gives you two widths in one. It is made in the USA.A Back-Up That Stays Out of the WayA back-up iron sight should sit low and forgotten until the day your optic fails, then come up instantly. The MBUS 3 folds flat to 0.47 in. above the rail and weighs about 25 grams (0.88 oz) with hardware, so it adds almost nothing to the rifle. Press the ambidextrous button from either side and the spring snaps the post upright to standard AR sight height, which keeps it compatible with common rear back-up sights and fixed rear sights.Key FeaturesCompact polymer body: 0.47 in. tall folded, 1.38 in. wide, about 0.88 ozClamps to M1913 Picatinny railsSpring-loaded, ambidextrous button for quick deploymentTool-less elevation adjustment wheel similar to the MBUS ProTwo post widths in one: 0.06 in. Standard for visibility and 0.04 in. Match for precisionStandard AR sight height when deployed; made in the USAElevation AdjustmentMagpul rates the elevation at about 1 MOA (1.131 in. at 100 m) per click with a 14.5 in. sight radius, and about 0.7 MOA (0.820 in. at 100 m) per click with a 20 in. sight radius. Because the wheel turns by hand, you can zero or adjust in the field without a sight tool.Mounting RequirementsThe front MBUS must be mounted on a railed forend on the same plane as the upper receiver's rail. Magpul specifically warns that it cannot be mounted on a railed gas block because of excess heat, and for the same reason the sight is not compatible with Magpul hand guards. Check that your handguard has a continuous top rail at receiver height before ordering.SpecificationsManufacturerMagpulModelMBUS 3 Sight - FrontPart NumberMAG1166-FDEUPC840815132172ColorFlat Dark EarthMountM1913 Picatinny railPlatformAR15/M4, AR10/SR25/M110Stowed Height Above RailAbout 0.47 in.Width1.38 in.Weight with Hardware25 g (about 0.88 oz)MaterialPolymerMade InUSAZeroing TipsZero back-up irons at the range with a stable rest. Many AR shooters use a 50-yard zero, which lands close to point of aim again around 200 yards with common 5.56 loads. Adjust elevation at the front sight and windage at the rear sight, keep notes on the click count from the fully-down position, and confirm both sights fold and lock without touching your optic. Recheck zero any time you move the handguard or remount the rear sight.Co-Witness With an OpticBecause the MBUS 3 deploys to standard AR sight height, it co-witnesses with red dots set at absolute or lower-third height. With the sights folded you get an unobstructed optic view, and if the optic fails or its battery dies you flip the irons up and look through the dead glass or remove the optic with its quick-detach mount.Pairing ItMost shooters pair this front sight with the matching MBUS 3 Rear in Flat Dark Earth for a lightweight, color-matched back-up set that sits below a red dot or magnified optic. Set the zero with the optic removed or flipped aside, then stow both sights and confirm they do not contact the optic mount when folded.Frequently Asked QuestionsHow tall is the MBUS 3 front when folded?About 0.47 in. above the rail, and 1.38 in. wide.Can I mount it on a gas block?No. Magpul says it cannot be mounted on a railed gas block because of excess heat. It must go on a railed forend at the same height as the receiver rail.Does it work with Magpul hand guards?No. Magpul lists it as not compatible with Magpul hand guards.Do I need a tool to adjust elevation?No. Elevation is set with a tool-less wheel, about 1 MOA per click on a 14.5 in. sight radius.What are the two post widths?A 0.06 in. Standard width for maximum visibility and a 0.04 in. Match width for more precise aiming.Is it the same height as other AR sights?Yes. It deploys to standard AR sight height for broad compatibility with rear sights.Does it co-witness with a red dot?Yes. At standard AR sight height it co-witnesses with optics mounted at absolute or lower-third height.Is it made in the USA?Yes. Magpul makes the MBUS 3 in the USA.Looking for more Magpul gear? Browse our rifle sights and sight accessories, or order the Magpul MBUS 3 Front Sight from BattleHawk Armory today.
- Brand
- Magpul Industries
- SKU
- 840815132172