-30%
Savings
-30%
Magpul Industries
Magpul DT Carbine Stock, Mil-Spec, AR-15/AR-10, Black, Stock
$48.99
$69.95
You save $20.96 (30%)
Sold by: Battle Hawk Armory
In Stock at Battle Hawk Armory
Easy Returns – merchant policy applies
Price Tracked – we monitor this deal 24/7
Price History
Loading price history...
Customer Reviews
Loading reviews...
Product Details
Magpul DT Carbine Stock, Mil-Spec, AR-15/AR-10, Black, StockThe Magpul DT Carbine Stock - Mil-Spec in Black (part number MAG1377-BLK) combines the footprint of Magpul's SL stock with the optimized curvature of the CTR, then adds Magpul's dual tensioning (DT) system for a tighter lockup on the buffer tube. An auto-engaging friction lock takes up slack between the lock pin and the receiver extension, and a single ambidextrous control lever handles length-of-pull changes without a secondary lock. It fits Mil-Spec carbine receiver extensions and is made in the USA.Dual Tensioning ExplainedCollapsible stocks wobble because there has to be clearance between the stock and the buffer tube. The DT stock's internal friction lock engages automatically and puts extra tension on the tube, so the stock stays tight in every position. Because the friction lock is automatic, there is no separate lever to remember; the one ambidextrous control lever moves the stock, and it locks solid as soon as you let go.Key FeaturesAuto-engaging DT friction lock adds tension on the buffer tube for extra tight lockupSingle ambidextrous control lever for LOP adjustment, no secondary lock neededNew non-slip butt-pad with optimized curvature for easier shoulder transitions and better fit with body armorSloping cheek weld with a slim profile; accepts Magpul CTR Cheek RisersIntegral rotation-limiting push-button QD swivel mount and a rear 1.25 in. sling loopCompatible with Magpul ASAP, ASAP QD and other receiver-mounted sling attachmentsMil-Spec OnlyThere are two basic sizes of M4 carbine receiver extensions: Mil-Spec and Commercial-Spec. The DT Carbine Stock fits only the common Mil-Spec tube from makers such as Colt, LMT, Ruger, S&W and SIG. The buffer tube is not included. Magpul's dimensions are based on a standard-length, flat-back M4 receiver extension and may vary slightly by tube manufacturer. The stock does not interfere with single-point slings attached to ASAP or ASAP QD end plates.SpecificationsManufacturerMagpulModelDT Carbine Stock - Mil-SpecPart NumberMAG1377-BLKUPC840815147541ColorBlackPlatformAR15/M4, AR10/SR25/M110FitsMil-Spec carbine receiver extension (not included)LOP, M4 CollapsedAbout 10.5 in.LOP, M4 ExtendedAbout 13.8 in.LOP Adjustment Range3.3 in.Length, Max7.0 in.Height, Max5.3 in.Width, Max1.6 in.Weight9.8 oz. (about 13.6 oz. with receiver extension)Made InUSAFitting and Adjustment TipsBefore you install any carbine stock, confirm the tube diameter: a Mil-Spec receiver extension measures about 1.148 in. across, while a Commercial tube is slightly larger and often has an angled back. Slide the stock on with the lock pin retracted, then run it through every position to make sure the pin drops cleanly into each detent. Set your length of pull with the gear you actually wear; with a plate carrier or heavy jacket you will usually run one or two positions shorter than in a T-shirt.DT vs. CTR vs. SLThe DT shares the SL stock's footprint and the CTR's butt-pad curvature. Compared with a CTR, it trades the manual friction lock lever for an automatic one, so the stock is always tight. Compared with an SL, it adds the DT tension system and a curved, non-slip pad that moves more easily on and off armor. If you want maximum stability with the least to remember, the DT is the one to choose.Sling OptionsYou can run a sling three ways: a push-button QD swivel in the integral, rotation-limiting socket, a strap through the rear 1.25 in. loop, or a receiver end plate such as the Magpul ASAP or ASAP QD. If you run a magnified optic or a rifle without a rear charging handle, snap on a CTR Cheek Riser to raise the comb.Frequently Asked QuestionsWill the DT stock fit a commercial buffer tube?No. It fits Mil-Spec carbine receiver extensions only.Is a buffer tube included?No. The receiver extension is sold separately.What does DT mean?Dual tensioning: an auto-engaging friction lock that adds tension on the buffer tube to reduce wobble.How much length of pull adjustment does it have?About 3.3 in., from roughly 10.5 in. collapsed to 13.8 in. extended on a standard M4 tube.Can I add a cheek riser?Yes. It is compatible with Magpul CTR Cheek Risers.How much does it weigh?9.8 oz. for the stock, about 13.6 oz. with a receiver extension.Does it fit AR-10 rifles?Yes, on Mil-Spec carbine receiver extensions. Magpul lists AR10/SR25/M110 and AR15/M4 platforms.Is it made in the USA?Yes.Looking for more Magpul gear? Browse our AR stocks and AR grips, or order the Magpul DT Carbine Stock from BattleHawk Armory today.
- Brand
- Magpul Industries
- SKU
- 840815147541