-38%
Savings
-38%
Gbrs Group
GBRS Group Lerna Mount Kit, Trijicon MRO, 2.91 in. Optic Centerline, Black, Optic Mount
$116.62
$189
You save $72.38 (38%)
Sold by: Battle Hawk Armory
In Stock at Battle Hawk Armory
Easy Returns – merchant policy applies
Price Tracked – we monitor this deal 24/7
Price History
Loading price history...
Customer Reviews
Loading reviews...
Product Details
GBRS Group Lerna Mount Kit, Trijicon MRO, 2.91 in. Optic Centerline, Black, Optic MountThe GBRS Group Lerna Mount Kit for the Trijicon MRO (part number GEAR-LERN-MRO-BLK) is a stand-alone high mount that puts your MRO on a 2.91-inch optic centerline above a 1913 Picatinny rail. That height lets you get on the dot with your head up and your spine straight, and it keeps the optic usable when you are wearing a helmet, ear pro or comms headset, a gas mask, or night vision. It is made in the USA, Berry compliant, and comes with the tools you need to install it.Why Buy It2.91 in. optic centerline: measured from the top of the rail to the center of the opticHeads-up posture: less neck tilt for faster target ID and better awarenessGear friendly: built to work around ear pro, comms headsets, gas masks and night visionMade for the Trijicon MRO: fits all Trijicon MRO red dots and optics with a similar footprint6061-T6 aluminum body: Type 3 Class 2 hard coat anodized, blackStainless hardware: 17-4 PH H900 stainless clamp bar and screws with a Melonite QPQ finishTools included: long-reach T10 key, long-reach 3/32 in. hex key and a 1/4 in. drive T25 bitLight: 4.3 ozWhy a Higher OpticMost red dot mounts were built around a bare-headed shooter pressing a cheek weld down onto the stock. Once you add a helmet, a headset or a mask, that low position forces your head down and forward, your eyes shift up in their sockets, and your posture breaks. The Lerna raises the MRO to a 2.91-inch centerline so the dot comes to your eye instead of the other way around. Standing taller behind the rifle keeps your plates square to the threat, gives your eyes a more natural line of sight, and makes it easier to scan and move between targets. With night vision, the extra height gives the tube room to line up behind the optic without craning your neck.The Lerna is the stand-alone version of the GBRS Hydra mounting system. It keeps the same optic height and clamp design but drops the forward accessory platform, so you get a clean, compact mount focused on the optic alone.ConstructionThe mount body is machined from 6061-T6 aluminum and finished with a Type 3, Class 2 hard coat anodize to MIL-A-8625. The clamp bar and screws are 17-4 PH stainless steel in the H900 condition with a Melonite QPQ finish for strength and corrosion resistance, and the washers are 18-8 stainless with a passivated black oxide finish. The recommended clamp torque of 45 inch-pounds is marked right on the mount, so you do not have to look it up at the bench. A low-profile clamp locks onto any 1913 Picatinny rail.InstallationEverything you need comes in the box. Use the long-reach T10 key and 3/32-inch hex key to attach your MRO to the mount, then set the mount on the rail and tighten the clamp screws with the T25 bit to 45 inch-pounds. A torque limiting driver is recommended to avoid over-tightening. Because the optic sits higher than a standard mount, you will need to re-zero after installation, and you should expect a little more mechanical offset at very close range. Browse our optic mounts or other mounts if you run a different red dot.Who It Is ForThe Lerna is a strong choice for duty and tactical users who wear helmets, comms or night vision, and for any shooter who simply prefers a heads-up stance behind an AR-15 or other carbine. The optic is not included; this listing is for the mount kit only.SpecificationsBrand: GBRS GroupModel: Lerna Mount KitPart number: GEAR-LERN-MRO-BLKUPC: 850056753036Optic fit: Trijicon MRO and similar footprintsOptic centerline: 2.91 in. above the top of the railRail interface: 1913 PicatinnyMount material: 6061-T6 aluminumMount finish: Type 3 Class 2 hard coat anodize, blackClamp bar and screws: 17-4 PH stainless steel, H900, Melonite QPQWashers: 18-8 stainless steel, passivated black oxideWeight: 4.3 ozRecommended torque: 45 in-lbIncluded: Lerna mount, long-reach T10 key, long-reach 3/32 in. hex key, 1/4 in. drive T25 bitCountry of origin: USA, Berry compliantFrequently Asked QuestionsIs the Trijicon MRO included?No. This is the mount kit only.How high does it put the optic?The optic centerline sits 2.91 inches above the top of the Picatinny rail.Will it fit other red dots?It fits all Trijicon MRO red dot sights and optics with a similar footprint. GBRS makes separate Lerna versions for other optics.Is it good for night vision?Yes. The higher optic is designed to work with night vision, helmets, comms headsets and gas masks.What torque should I use?45 inch-pounds, as marked on the mount.What is the difference between the Lerna and the Hydra?The Lerna uses the Hydra optic height and mounting system without the forward accessory platform.Order the GBRS Group Lerna Mount Kit for Trijicon MRO from BattleHawk Armory and get your optic up where your eyes are.
- Brand
- Gbrs Group
- SKU
- 850056753036