DMM Wallnut Set 3-8

Despite their simple appearance, Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Curved taper gives stable placements and resists lifting out Allows placement in two orientations for increased versatility Grooved faces improve security in irregular rock Colour coded for easy size identification Code Colour Strength Weight Range Certification Wallnut No.3 A1613A Silver 11kN 28g 9.4 / 16.5mm EN 12270:2013 Wallnut No.4 A1614A Gold 12kN 30g 11.0 / 17.6mm EN 12270:2013 Wallnut No.5 A1615A Blue 12kN 32g 13.2 / 19.4mm EN 12270:2013 Wallnut No.6 A1616A Red 12kN 39g 15.6 / 22.6mm EN 12270:2013 Wallnut No.7 A1617A Grey 12kN 40g 18.9 / 25.8mm EN 12270:2013 Wallnut No.8 A1618A Turquoise 12kN 45g 22.3 / 29.0mm EN 12270:2013