Our first batch of Jayhawkers sold out quickly! Set up for the new gravel bike wheel "standard" - 100x12TA and 142x12TA. Ships with a set of transformative end caps that allow you to convert the front wheel to 100x15TA (for your suspension fork) or 100x9 Quick Release and the rear wheel to 135x10 Quick Release. We'll even make this change for you in advance of shipping if you let us know your preference. Not sure if this will fit your bike? Check our cross-reference table or email us at [email protected] Jayhawker is named after the abolitionist guerilla fighters that made their name on the gravel roads in Kansas in the 1850s. This strong and capable Dynamo-enabled carbon fiber wheelset is designed for the endurance gravel rider in mind and does double duty as your soon-to-be-favorite bikepacking setup. The Wheelset is designed around me, the 200lbs I carry around, and the 8,000 - 10,000 miles I ride per year on road, gravel, and singletrack. If it works for me, it will most certainly work for you. And because I've designed this wheelset for me, I've made sure the hubs come with really great Enduro bearings that will last a long time and are easy to find (even on Amazon!). I've also included two extra spokes per wheel. Why? Because someday--out on the trail or in the workshop--I'm going to need them and I'm not ever going to walk back to town again if I can avoid it. The Jayhawker is produced in Taiwan to our specifications by Gigantex, one of the world's largest private label carbon fiber wheel manufacturers. We also made sure that the wheelset is certified to the European Wheel Standard ISO 4210-7--one that requires a brutal 2,000km bench test. Gigantex produces thousands of rims and wheelsets for nearly all of the major Global bicycle brands. We've managed to secure a production slot in between the big names and we're paying forward the favor to our customers! Jayhawker Carbon Fiber Rims:Front: 32 Spokes, Rear: 32 Spokes29er / 622 profile 23mm inner width29mm outer width28mm rim height Disc brakes only - no rim brakingBead retention lip allows for higher pressures and minimizes blow off risks associated with non-lip rimsetsSlightly asymmetric - providing greater strengthUD matte flat black finish - minimal carbon fiber cross hatch Looks great dirty or cleanStealth - zero conspicuous branding Tire profiles as narrow as 37mm and as wide as 2.35 in (2.6 in at the max) Hubset:Front Hub: Powerway 100mmx12TA j-bend hubset. Bearings: 2x Enduro MR17287LLB sealed bearingsShips with end cap kit that converts to 100x15TA and 100x9 QRRear Hub: Powerway PH-M80, 12 x 142 Thru Axle, 6-hole disc6 Pawl Removable Freehub9 degrees of engagement (360/40) and a buzzy 40 tooth ratchet ring 1 x Enduro 6802 ABEC3 sealed bearings, 3 x Enduro 6902 ABEC3 sealed bearings Shimano HG or SRAM XDR Freehubs. SRAM XD and Shimano Microspline available separately.Ships with rear end cap kit to convert to 135x10 Quick ReleaseThru Axles not included.Spokes, Valves, and Tubeless TapeSapim SS spokes (black) with Sapim Brass Npls (black)Forgiving cross-3 lacing4 extra spokes per wheelset Shipped with tubeless rim tape installed and tubeless valves installedRemove valve to run with tubesWheelset Mass: - (includes rim tape and valves, like you'll be using them!)Front - 809g, Rear - 930g,1 year warranty - parts failure and workmanship. Sorry -- due to shipping constraints -- no sales outside of the continental U.S. without a prior incremental shipping quotation.
